Chapter 2: Quick Start
13
a. Press
the
FUNC
button to activate the Function Menu.
b. Press
the and buttons to select "Set Stack ID."
c. Press
the
ENT
button to confirm your selection.
d. Press
the and buttons to assign the numeric ID. The
guideline of ID assignment is:
Assign 1 as the ID for the first Stacking Unit, which is directly
connected the Main Unit.
Assign 2 as the ID for the second Stacking Unit, which is
connected to the first Stacking Unit.
Assign 3 as the ID for the third Stacking Unit, which is
connected to the second Stacking Unit.
e. Press
the
ENT
button to save the setting.
8. Turn OFF all Paragon II devices.
9. Turn on the Stacking Unit first. If there are multiple Stacking Units, turn
on the Stacking Units from the last one to the first one in sequence.
10. Turn on the Main Unit.
Step (B): Connect User Stations
To connect one or more user stations
1. Connect a user station to the Main Unit.
a. Plug one end of a Cat5 UTP cable into User Port number 1 on the
back of the Main Unit.
b. Plug the other end of the cable into the RJ45 port on the back of
the user station.
2. Connect a power cord to the user station and turn it on.
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
