Raritan PARAGON II Series, User Manual

Page: 108 / 258

Chapter 6: Operation - User Functions
86
•
Power cycle the desired user station(s), be it an ACTIVATOR or
FOLLOWER user station.
Note: If the user station is P2-USTIP, it automatically enters the
remote mode when quitting the Multiple Video mode. Press
Ctrl+Alt+Delete on the P2-USTIP if you want to return to the local
mode.
Limitation
The function is not applicable to those channels which share only one path
via the tiered device, such as P2ZCIM, P2CIM-APS2-B or P2CIM-AUSB-B
(for IBM BladeCenter servers).
Messages on the ACTIVATOR User Station
The success or failure of data outputs from the FOLLOWER channel(s) will
be reported on the screen of the ACTIVATOR user station (see the
example images below).
The 1st FOLLOWER channel successfully outputs its data
The 2nd FOLLOWER channel successfully outputs its data
The 3rd FOLLOWER channel fails to output its data
Every FOLLOWER channel successfully outputs its data
The failure of data output can be caused by one of the following reasons:
•
Blockage to the FOLLOWER channel port(s). For example, other
user(s) may be accessing one or more of the FOLLOWER channels in
Private mode and thus block the access.
•
Mouse/keyboard activity is detected on the FOLLOWER user station(s)
when the Multiple Video command is issued. Paragon will NOT
execute Multiple Video in order to protect that server's operation.
•
The FOLLOWER user station is P2-USTIP which enters the remote
mode (no OSUI displayed). This message will be displayed on the
screen.