Appendix D: Connecting Serial Devices to Paragon II System
201
Conveniently, you may program any of the PC keyboard's twelve function
keys to trigger your most-often-used data-stream commands. Pressing
any key set this way causes Paragon II to send the corresponding
command to the device. During the online session, you can also send any
of the following key combinations (press and hold
Ctrl
or
Alt
, press and
release the command key, and release
Ctrl
or
Alt
) to control your
communication with the device or to access AUATC's help and setup
screens:
•
Ctrl
+
Break
(the
Pause
/
Break
key next to the
Scroll Lock
key):
Resets both AUATC and the serial communication with the device.
•
Ctrl
+
S
(not case-sensitive): Sends a command to the device to
temporarily stop it from sending any data; until the flow is allowed to
resume, all output data will be queued by the device.
•
Ctrl
+
Q
(not case-sensitive): Sends a command to allow the device to
resume sending data after being halted by the
CTRL
+
S
command.
•
Alt
+
F1
: Displays the Help screen.
•
Alt
+
F2
: Displays the Setup screen.
•
Alt
+
F3
: Displays the Set Up Programmable Keys screen.
•
Alt
+
F4
: Switch to Buffer Edit Mode.
Help Mode
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
