Appendix F: Integration with Third-Party Switching Devices
217
To enable this function, three basic steps are required.
•
STEP (A): Install Appropriate Audio/Video Equipment
•
STEP (B): Associate Router Ports with Paragon Ports in Paragon
Manager
•
STEP (C): Keep Paragon Manager Running and Connected
You perform STEP (A) only when the audio/video equipment is not
installed, but it is always necessary to perform STEP (B) and STEP (C)
each time when you want to activate the audio/video switching function.
STEP (A): Install Appropriate Audio/Video Equipment
If you haven't installed audio/video equipment properly, follow this
procedure to install them.
To install audio/video equipment properly in the Paragon/NV5128
configuration
1. Connect appropriate audio/video equipment to the NV5128 router,
including:
Connection of audio/video output devices, such as audio/video
editing devices and servers, to the source ports (input connectors)
on the router.
Connection of audio/video input devices, such as speakers and
monitors, to the destination ports (output connectors) on the
router.
For more details, see the user documentation that accompanies the
NV5128 router.
2. Place the audio/video input devices near appropriate user stations.
Tip: Note down the router's destination port numbers for these audio/video
input devices and Paragon user port numbers for user stations. The
information is required later when setting up the router association.
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
