Chapter 2: Quick Start
15
2. Depending on the CIM model you purchased, plug the connectors of
the CIM into a server's PS/2 or USB keyboard, mouse, and VGA ports.
Tip: If the server provides a DVI-D connector instead of a VGA port,
Raritan recommends that you connect the CIM to the server using a
Smart View DVI-to-VGA (female to female) converter (DV-101). Note
that currently only the Smart View DVI-to-VGA converter has been
tested and is officially supported by Raritan for use with Paragon II.
3. Turn on the server.
4. Repeat Steps 1 to 3 for all other servers you want to connect to
remaining Channel Ports.
Initial Verification
To verify that the server connected to the Paragon system can be
operated:
1. Turn on all devices in the Paragon II system.
2. The Login screen of the On-Screen User Interface (OSUI) is displayed
on the monitor connected to the user station.
3. Type your user name and password in the appropriate fields and press
Enter
. For example, if you are the administrator:
a. Type
admin
in the
User Name
field and press
Enter
.
b. Type
raritan
(the default password; all lowercase) in the
Password
field and press
Enter
. Note the password is
case-sensitive.
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
