Chapter 7: Operation - Administrator Functions
118
A message in the message bar asks you to confirm the System Reboot
command. You must type
Y-E-S
, the complete word 'Yes,' and press
Enter
to confirm, or press
Esc
to cancel. A “Reset” message screen
appears and remains onscreen while your system reboots. If you have
multiple tiers, the reboot will take slightly longer than if you are rebooting
only a single Paragon switch.
System Reset
To reset the Device Name, Network Settings, User Profiles, System
Configuration, and Channel Configuration, returning them to the original
factory default values, without having to physically go to each switch to
reset it, select option 6
, System Reset Settings,
from the Administration
Menu. You can reset one, several, or all system settings in any
combination.
1. On the System/Device Reset menu, press , , or
Tab
to move to
the field you want to reset.
2. Press
Enter
, and then press the arrow keys to toggle between
Yes
and
No.
When finished, press
Enter
.
3. When finished, press the letter
O
on your keyboard.
4. A message in the message bar asks you to confirm the System Reset
command. You must type
Y-E-S
, the complete word 'Yes,' and press
Enter
to confirm, or press
Esc
to cancel.
5. The Paragon switch logs out all local users, disconnects all
connections, and then sends a Ready-to-Reset report to all Paragon
clients. A progress indicator appears on the message bar to indicate
the current update percentage. During the database update, users are
unable to operate the OSUI functions.
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
