Raritan PARAGON II Series, User Manual

Page: 89 / 258

Chapter 6: Operation - User Functions
67
Manually Selecting the Access Path
When all tiered devices in the Paragon II system are implemented with
firmware version later than 3E3, you can manually choose a path to
access a target server in the
channel number view . For older Paragon I
or Paragon II products to support this feature, see the note in the end of
this section for more information.
1. Make sure you are in the channel number view in the Selection Menu.
If not, press F12 to toggle the view.
2. Press the and keys to highlight one of the channels in purple
(available paths) or yellow (in PC share mode) which are connected to
a tiered device (a tiered device is indicated with the symbol “- -”
displayed in the
Scn field).
3. Press Enter . Both of the chosen path information and the channel list
of the selected tiered device are displayed on the screen.