manualshive.com logo in svg

Raritan PARAGON II Series, User Manual

The Raritan PARAGON II Series product offers unparalleled performance and versatility in data center management. Enhance your productivity by accessing multiple servers with ease. Our comprehensive user manual and brochure are available for free download from manualshive.com, empowering you to harness the full potential of this innovative solution.

Share
Download
background image

Appendix H: More Resources or Information 
 

230

 

 

Symptom 

Probable cause 

OSUI non-functional. 

Replace the keyboard. OSUI works only with PS/2 or extended 
AT-style keyboards. 

Video is “fuzzy” or out of 
focus. 

Video Gain Adjustment is required (especially needed with LCD flat 
panel monitors). 

•

 

Activate OSUI (by pressing the Scroll Lock key twice rapidly). 

•

 

Use numeric  and - keys to adjust the video image until it 
is in focus. 

The USB Combo 
keyboard and USB 
mouse do not function 
properly. 

You may not follow the procedure described in this user guide to 
connect the USB Combo keyboard and mouse. Power cycle the user 
station to resolve the issue. See 

How to Connect a USB Combo 

Keyboard

 (on page 47) for more information. 

Access to an available 
channel is unsuccessful 
and the OSUI shows 
"Switch busy. Please try 
again." 

If two or more users highlight the same channel and press Enter to 
access the channel almost "at the same second," the access conflict 
occurs. The system will accept one user's access and reject the 
others. Those who are rejected see the message "Switch busy. 
Please try again." on the OSUI.  

When this occurs, try to access the same channel again seconds later 
in the PC Share or Public View mode, or after the occupying user 
releases the channel in the Private mode. 

 

 

Paragon II FAQs Online 

Frequently Asked Questions for Paragon II are located online on the 
Raritan website. 

1. Visit 

the 

Raritan website

 (http://www.raritan.com) with your browser. 

2.  Click Products > Analog KVM > Paragon II. 

3.  Click any Paragon II switch listed on the webpage, such as 

P2-UMT1664M or P2-UMT832M. 

4.  Click the FAQ tab. 

You can either read the FAQ online or download the FAQ PDF file. 

 

Summary of Contents for PARAGON II Series



































































































































































































































































Reviews:

No comments

Related manuals for PARAGON II Series

AAVARA PB5000 User Manual preview
PB5000
Brand: AAVARA Pages: 23
i3 International S244 Quick Start Manual preview
S244
Brand: i3 International Pages: 2
l-com IES Series User Manual preview
IES Series
Brand: l-com Pages: 12
Black Box ServSwitch KV1510A User Manual preview
ServSwitch KV1510A
Brand: Black Box Pages: 16
NTI UNIMUX-nXm-UHD Installation And Operation Manual preview
UNIMUX-nXm-UHD
Brand: NTI Pages: 69
SMC Networks SMC8606SX Specification Sheet preview
SMC8606SX
Brand: SMC Networks Pages: 2
Sun Oracle Sun Datacenter InfiniBand Switch 36 Hardware Security Manual preview
Sun Datacenter InfiniBand Switch 36
Brand: Sun Oracle Pages: 12
Leviton 47693-ESM Product Specifications preview
47693-ESM
Brand: Leviton Pages: 2
Smartwares SH5-TSW-C Quick Start Manual preview
SH5-TSW-C
Brand: Smartwares Pages: 2
Allied Telesis AT-GS903SX Installation Manual preview
AT-GS903SX
Brand: Allied Telesis Pages: 44
CTC Union ITP-800-8PH24 Quick Installation Manual preview
ITP-800-8PH24
Brand: CTC Union Pages: 14
Led Control LVS5066 User Manual preview
LVS5066
Brand: Led Control Pages: 22
Microsens MS453510M User Manual preview
MS453510M
Brand: Microsens Pages: 42
LightwaveRF Comfy LW920 Professional Series Instruction Manual preview
Comfy LW920 Professional Series
Brand: LightwaveRF Pages: 41
G&D DP1.2-MUX2-NT Installation And Operation Manual preview
DP1.2-MUX2-NT
Brand: G&D Pages: 76
autenco AUT PIRSP Installation & Operating Instructions preview
AUT PIRSP
Brand: autenco Pages: 2
OEZ BD250NE305-250-V Instructions For Use Manual preview
BD250NE305-250-V
Brand: OEZ Pages: 25
SP Controls SP-6VA1S User Manual preview
SP-6VA1S
Brand: SP Controls Pages: 24

Brands by name

Popular brands

Load more brands