Chapter 12: Firmware Upgrade
180
STEP (D): Launch the Paragon Update Utility
After the hardware connection is completed, you can execute the Paragon
Update utility to upgrade the firmware. Note that Paragon Update version
2.4.4 or later supports this firmware upgrade. Earlier versions do not have
this capability. Please use the latest version of the Paragon Upgrade utility
which you downloaded along with the HubPac firmware to ensure the
success of the upgrade.
Prior to the firmware update with Paragon Update, ensure the P2-HubPac
is turned on.
To launch the Paragon Update utility
1. Double click “ParagonUpdate_xxx.exe” (xxx represents the version).
The
Paragon Update
window appears.
2. Specify the device information of the connected HubPac.
a. Type a name for the HubPac in the
Name
field.
b. Select <Default Serial> in the
IP address/Serial
field.
c. Type the COM port number that your PC assigns to the HubPac in
the
Port
field.
3. Select the checkbox (
) beside the HubPac device.
4. Click
Load Hex File
and navigate to select the appropriate firmware
file.
5. Click
Send To Paragon
.
6. Click
Yes
. The utility starts to upgrade the “connected cluster” of the
HubPac.
7. When the connected cluster is upgraded successfully, the “Device
Update Successful” message appears.
Keep the
Paragon Update
window open if other clusters of the same
HubPac are not upgraded yet. See the subsequent section for more
information.
For more details of the Paragon Update utility, see
Paragon Manager
User Guide
.
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
