Chapter 6: Operation - User Functions
73
•
The Paragon switch to which your user station connects must be with
the firmware version 3EB or later.
Note: If your Paragon switch or P2-EUST (or P2-EUST/C) is implemented
with old firmware, you can upgrade the firmware to benefit from the feature.
See
Firmware Upgrade
(on page 164) for more information.
Definition of the Previous and Next Channels
Please note that the Up/Down Channel function is performed based on the
alphanumerical sequence, that is, the sequence of channel names instead
of channel numbers. After pressing the Up/Down Channel key
combination, the channel you will be switched to is the one with all of the
following characteristics:
•
It is the next or previous channel in the alphanumerical order
•
It is an active channel
•
It is available — for example, it is not being accessed by any user in
the Private mode
•
It is one of the channels that you have permission to access
Performing the Up/Down Channel Function
In order to use the hot key combination, follow two major steps below:
STEP (A): Set up the Up/Down Channel key
STEP (B): Change channels with the key combination
STEP (A): Set up the Up/Down Channel Key
Prior to the use of the Up/Down Channel hot key combination, you must
activate and assign the Up/Down Channel key in the User Profile menu
first.
1. If the OSUI is not on the screen, activate it by pressing the hot key
(default:
Scroll Lock
) twice in quick succession.
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
