Chapter 3: Rackmount and Installation
34
b. Plug one end of a Cat5 UTP cable into the RJ45 port on a CIM.
c. Plug the other end of cable into the RJ45 1-IN port on the back of
HubPac.
d. Turn ON the server.
e. Repeat the above steps to connect the remaining servers,
connecting the Cat5 UTP cable to the HubPac at the RJ45 2-IN,
3-IN, 4-IN, 5-IN, 6-IN, 7-IN, and 8-IN port for each consecutive
server (2 through 8) added.
3. Connect the HubPac to each Paragon switch by repeating all of the
following steps for each 5-port cluster on the HubPac:
Note: There are 8 five-port clusters on the HubPac. For each cluster
the number in front of the RJ45 IN port represents the cluster number.
For example, cluster 1’s first RJ45 port is 1 IN, cluster 2’s is 2 IN, and
so on. In the instructions below, “X” represents the cluster number (1
through 8).
a. Plug one end of a Cat5 UTP cable into the RJ45 X-1 port on the
back of the HubPac.
b. Plug the other end of the cable into channel port # N on the back of
one of the desired Paragon switches.
c. Plug one end of a Cat5 UTP cable into the RJ45 X-2 port on the
back of the HubPac.
d. Plug the other end of the cable into channel port # N on the back of
the second desired Paragon switch.
e. Plug one end of a Cat5 UTP cable into the RJ45 X-3 port on the
back of the HubPac.
f.
Plug the other end of the cable into channel port # N on the back of
the third desired Paragon switch.
g. Plug one end of a Cat5 UTP cable into the RJ45 X-4 port on the
back of the HubPac.
h. Plug the other end of the cable into channel port # N on the back of
the fourth desired Paragon switch.
4. Connect the power cord to the back of the HubPac. Turn ON the
HubPac.
5. Turn ON each of the Paragon switches.
A HubPac can connect 8 servers, and allows each server to be connected
to 4 different Paragon switches at once. Follow the above steps for each
additional HubPac to be added.
Important: In order to perform the Multiple Video function with
P2-HubPac, ensure a supported P2-HubPac configuration has been
deployed. For details, see
P2-HubPac Configuration and Multiple
Video (on page 158).
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
