Chapter 4: Front Panel Display and Controls
40
If you press the
ENT
button, both the channel configuration and
the user profile and system settings will be cleared.
Function Selection Screen
Several administrative functions can be performed on the Function Menu
on the Paragon switch's front panel LCD.
Display Ver./SN
Test User UST1
Test Chan. UKVM
Test Stack Unit
Stacking Support
Set LCD Contrast
Re-Configure
Set IP Address
Reset Unit
Selecting a Function
To select a function on the front panel
1. Press
the
FUNC
button on the front panel of the Paragon switch to
enter the Function Menu mode.
2. Press
the and buttons to scroll through the Function List.
3. Press
the
ENT
button on the front panel to select one displayed
function and use the instructions described for each specified function
on the following pages.
4. Press
the
ESC
button on the front panel at any time to return to Normal
Display.
Display Ver./SN
This function displays current version of firmware, the firmware loader, the
device's serial number, and the field programmable gate array (FPGA).
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
