manualshive.com logo in svg

Raritan PARAGON II Series, User Manual

The Raritan PARAGON II Series product offers unparalleled performance and versatility in data center management. Enhance your productivity by accessing multiple servers with ease. Our comprehensive user manual and brochure are available for free download from manualshive.com, empowering you to harness the full potential of this innovative solution.

Share
Download
background image

 

Chapter 9: Managing IBM BladeCenter Servers 

 

 

141

 

ƒ

  Black channels indicate that either there is no blade server 

installed or the installed blade server is turned off. 

 

If any user is accessing a blade server while the refresh command is 
issued by the administrator, two results are possible: 

•

 

If the keyboard/mouse activity has been idle for more than 200ms, the 
user(s) will be disconnected and the refresh command is executed. 

•

 

Otherwise, the refresh command is NOT executed and the message 
“BladeServer is occupied” will be displayed in the message bar. 

Tip: You can remotely update the IBM BladeCenter channel status through 
IP-Reach or Paragon Manager: 

* Log in to the IP-Reach device that is connected to the Paragon system, 
and follow the same OSUI procedure to refresh the IBM BladeCenter 
channel. For more information on the IP-Reach device, see the IP-Reach 
User Guide. This user guide is available on Raritan website's 

Firmware 

and Documentation section

 

(http://www.raritan.com/support/firmware-and-documentation/). 

* Make a connection to the Paragon system from Paragon Manager, and 
then perform the 

RefreshBLD-I 

command in the Channel Information 

Editor dialog. See 

Remotely Refreshing IBM BladeCenter Channel 

Status

 (on page 207) for detailed information. 

 

Renaming a BladeCenter Chassis 

By default, IBM BladeCenter is named “IBM-Blade” in the Selection Menu 
of Paragon system. 

1.  When the OSUI is on the screen, press 

F5

 to go to the Administration 

Menu. 

2.  Select the Channel Configuration submenu, and press 

Enter

. 

Summary of Contents for PARAGON II Series



































































































































































































































































Reviews:

No comments

Related manuals for PARAGON II Series

Barksdale 9000 Series Operating Instructions preview
9000 Series
Brand: Barksdale Pages: 5
Ubisys S1 Reference Manual preview
S1
Brand: Ubisys Pages: 40
3Com SUPERSTACK 3 3226 Datasheet preview
SUPERSTACK 3 3226
Brand: 3Com Pages: 5
3Com LANPLEX 2500 Operation Manual preview
LANPLEX 2500
Brand: 3Com Pages: 139
3Com CoreBuilder 7000 Installation & Start?Up Manual preview
CoreBuilder 7000
Brand: 3Com Pages: 150
3Com CoreBuilder 7000 Operation Manual preview
CoreBuilder 7000
Brand: 3Com Pages: 264
3Com 4007 Command Reference Manual preview
4007
Brand: 3Com Pages: 574
3Com 3CRUS2475 24 User Manual preview
3CRUS2475 24
Brand: 3Com Pages: 333
3Com SUPERSTACK 3 3226 Getting Started Manual preview
SUPERSTACK 3 3226
Brand: 3Com Pages: 70
3Com OfficeConnect 3C16790C User Manual preview
OfficeConnect 3C16790C
Brand: 3Com Pages: 18
3Com 5500-EI PWR Reference Manual preview
5500-EI PWR
Brand: 3Com Pages: 1314
3Com SuperStack II Switch 1100 User Manual preview
SuperStack II Switch 1100
Brand: 3Com Pages: 62
Yeastar Technology MyPBX Manual preview
MyPBX
Brand: Yeastar Technology Pages: 11
Belkin F5U307 User Manual preview
F5U307
Brand: Belkin Pages: 12
Patton electronics SmartNode 4658 Series Quick Start Manual preview
SmartNode 4658 Series
Brand: Patton electronics Pages: 12
Setra Systems SSC-2S Operation And Installation Instructions preview
SSC-2S
Brand: Setra Systems Pages: 4
Eaton TM-1-8210 Series Instruction Leaflet preview
TM-1-8210 Series
Brand: Eaton Pages: 3
Silent Gliss 0913 Installation, Programming And Operation Instructions preview
0913
Brand: Silent Gliss Pages: 4

Brands by name

Popular brands

Load more brands