xi
This chapter includes 10 of the most common use cases to help familiarize
users quickly with practical utilization of the Paragon system. Please note
that this section provides common examples, which could vary according
to your actual configuration and operations.
Case 1. Setting the Network Configuration
Purpose: To set the network configuration of the Paragon switch, such as
an IP address, so it can be accessed or upgraded through the network.
1. Log in to the Paragon system as an administrator.
a. Type
admin
in the
User Name
field and press
Enter
.
b. Type
raritan
(the default password; all lowercase) in the
Password
field and press
Enter
. Note the password is
case-sensitive.
2. Press
F5
--> select
Network Setting
.
3. Configure
the
Current IP
field. For example, if you want to assign
90.180.52.157 as the IP address, you do this:
a. Highlight the first number in the
IP
field.
b. Press
Enter
to turn the highlight color to green.
c. Type
090
and press
Enter
. (Note that Paragon does not support
the use of the keypad.)
d. Repeat similar steps to modify remaining numbers in this field.
4. Configure remaining fields respectively, including Net Mask, Gateway
IP and Port No.
5.
(Optional)
By default, Encryption is set to “Off.” To change this
setting:
a. Press
Enter
to turn the highlight color to green.
b. Press the arrow keys ( , ,
,
) to switch between options
and press
Enter
.
6.
(Optional)
Configure the
Keys
field if you select “On” in the
Encryption
field.
7. Press
S
to save the changes. The system restarts itself.
See
Network Settings
(on page 119) for details.
How-To: Paragon Essentials
Summary of Contents for PARAGON II Series
Page 22: ......
Page 28: ...Chapter 1 Introduction 6 User Station P2 EUST CIM P2CIM APS2 P2 EUST C Front and Rear Sides ...
Page 257: ......
