Startup
R&S
®
UPV
61
Getting Started 1146.2078.62 ─ 09
to quickly identify an instrument that is mounted together with several other instru-
ments of the same type, such as in a 19" rack.
Clicking on "ACTIVE (press to toggle)" switches the flashing state off again.
The left side shows a navigation bar containing the important "LAN Configuration"
menu. This page of the LXI Web configuration website enables extensive configuration
of all important LAN parameters, which is necessary because the configuration steps
mentioned in the next sections cannot be performed as described with a virtual front
panel instrument.
Changing the LAN configuration is password-protected. The password reads LxiWebIfc
(notice upper and lower case characters). This password cannot be changed in the
current firmware version.
2.10.3.5
IP Configuration
●
TCP/IP Mode
–
decides whether DHCP is switched on or not. The IP Address, Subnet Mask,
Default Gateway and DNS Server configuration fields are only enabled if DHCP
is disabled. Consult the network administrator if it is necessary to modify these
settings or any other settings.
Connect R&S UPV to a Network (LAN)