![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652180.webp)
Manual Operation
R&S
®
UPV
164
Getting Started 1146.2078.62 ─ 09
Function
Front panel
PC keyboard
Mouse
Open panel for configur-
ing combined field or
numeric display field
Press the MENU key
and highlight the Disp
Config button with the
rotary knob or cursor
keys, open the pulldown
menu with the ENTER
key or a rotary-knob click
and highlight and select
the corresponding panel.
Press shortcut CTRL +
M, then highlight Disp
Config button using TAB
or SHIFT + TAB keys,
open the pulldown menu
using the Enter key,
highlight the desired
panel using the cursor
keys and select using
the Enter key.
Move the mouse pointer
to the left edge of the
screen, activate the Disp
Config button in the
menu bar and click on
the desired panel.
For the two-channel analyzer instruments, the Config panels are offered in two col-
umns since each channel can be configured by itself. For analyzer instruments with
more than 2 channels, the Config panels are offered as a single column since the set-
tings apply uniformly to all channels.
Some of the basic settings in these panels are described here using the "Lev Mon
Config" panel as an example. Since the combo display is an extension of the numeric
display field, the settings also influence the numeric display field.
Some of the settings described below are only visible if the combined display is of ade-
quate size on the screen. For example, scaling and grid lines are hidden automatically
and stepwise if the display is reduced in size.
●
Unit of measurement result
This parameter field is used to set the unit for the measurement result display. The
units available in the parameter list depend in the type of measurement.
Measurement Displays