Getting Started
R&S
®
UPV
96
Getting Started 1146.2078.62 ─ 09
Range" field always refer to the highlighted parameter field. The valid value range is
given in the unit currently selected.
Entries outside the specified value range are not accepted; an audible warning is
issued and the entry is changed to its permissible minimum or maximum value.
The specified ranges for value entries always take the current status of the instrument
into consideration. They are therefore not constant and depend on the presets already
configured for other parameters.
Below is an example for entering the generator output voltage; additional units can be
displayed using the >> button:
3.3.9 Measurement Functions and Displaying Measurement Results
The audio analyzer offers various types of measurement windows for displaying the
results of the numerous measurement functions. The measurement results can be dis-
played as digital numeric values, in analog bar graphs, in result graphics or in data
lists. The user can open any number of measurement windows on the screen.
●
What
(which measurement function) is measured and
how
(which measurement
method) measurement is performed, is preset in the "Analyzer
Function" panel.
●
The
configuration panels for measured value display
are used to determine
how the measurement results are presented (i.e. which unit, how many digits, etc.).
A series of panels for the different measurement windows are provided for this pur-
pose.
●
The results are finally displayed in the various
measurement windows
.
Brief Introduction to Operation