![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652109.webp)
Getting Started
R&S
®
UPV
93
Getting Started 1146.2078.62 ─ 09
Parameters are selected by highlighting the desired item and confirming with the
ENTER key or a rotary-knob click.
Items in the parameter list are highlighted using the rotary knob, the up/down cursor
keys or the keys.
The parameter list can be exited without adopting the highlighted parameter by press-
ing the ESC key.
If the list is longer than the displayed window, a scrollbar is available.
Alternatively, parameters can also be selected using the softkeys.
The contents of the parameter lists are not fixed but vary depending on other settings
selected.
Entering a Numeric Value
Numeric values can be entered or edited in these fields.
The following always applies: Entries outside the possible value range are not accep-
ted; an audible warning is issued and the entry is changed to its permissible minimum
or maximum value. The possible value range is displayed above the softkey bar.
Edit mode:
When the focus is moved to a numeric entry field, the system enters Edit mode, which
is indicated by a green selection frame. The new value is entered via the keypad on
the front panel.
The numeric entry field is closed with:
●
ENTER – The newly entered value is adopted
●
ESC – The old value is retained
●
Softkeys – The selected unit is set and adopted together with the newly entered
value.
The entered value is set in the hardware as soon as the numeric entry field is closed.
Direct mode:
Brief Introduction to Operation