![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652201.webp)
Manual Operation
R&S
®
UPV
185
Getting Started 1146.2078.62 ─ 09
The "Act Curs In" button zooms in on the section of graph on either side of the active
X-cursor.
●
"Act Curs Out "
The "Act Curs Out" button zooms out from the section of graph on either side of the
active X-cursor.
●
"Betw V Curs"
or
"Betw H Curs"
The "Betw V Curs" or "Betw H Curs" button zooms in on the area between the two X or
Y-cursors. The zoomed display is fitted to the size of the set graph.
●
"Unzoom "
The "Unzoom" button restores the original axis, i.e. undoes all of the zoom operations
performed.
●
"Undo "
The "Undo" button undoes the zoom operation last performed.
●
"Autoscale "
The "Autoscale" button displays the next softkey level. The softkeys available here are
used to rescale the selected axes (if required, it is also possible to rescale the axes for
certain traces only). The initiated action corresponds to that of the "Autoscale "button in
the corresponding configuration panel.
Restart Min/Max, Lim Viol function
Activating the "Restart Min/Max, Lim Violation" button displays another softkey level.
If the Show
Min/Max function was selected in the associated configuration panel, acti-
vating the appropriate button in the softkey bar reactivates indication of the lowest and
highest measured value.
If the Lim
upper or Lim
lower function was selected in the associated configuration
panel, activating the appropriate button in the softkey bar reactivates limit monitoring.
Config function
The "Config" button allows the user to open or close the configuration panel while
operating the associated graphical window.
4.8.4.9
Measured value Display in Lists
The measured values can also be displayed in lists instead of or in combination with
the graphical windows.
Measurement Displays