![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652078.webp)
Startup
R&S
®
UPV
62
Getting Started 1146.2078.62 ─ 09
Switching from DHCP enabled mode to manual configuration mode may trigger an
instrument restart when the new setting is confirmed (depends on the configuration). If
incorrect network configuration settings have been entered, LAN RESET on the rear
panel of the instrument must be used to restore access to the Web interface.
●
IP address
–
Allows the IP address of the instrument to be modified if DHCP is disabled.
●
Subnet mask, default gateway
–
are settings that may have to be changed at times compared to the displayed
presets if DHCP is switched off. Consult the network administrator for the
proper values if it is necessary to modify these settings.
●
DNS server
–
This is the IP address of the domain name server of the network segment.
Consult the network administrator if it is necessary to modify this setting when
operating with DHCP disabled.
●
Dynamic DNS
–
Allows different DNS servers to be addressed in succession. Consult the net-
work administrator if it is necessary to modify this setting when operating with
DHCP disabled.
2.10.3.6
Advanced LAN Configuration
"Advanced LAN Configuration" provides LAN settings that are not declared mandatory
by the LXI standard. These advanced parameters should only be modified by experi-
enced users.
●
Negotiation
–
The Negotiation configuration field provides different Ethernet speed and
duplex mode settings. In general, the Auto Detect mode is sufficient.
Connect R&S UPV to a Network (LAN)