![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652170.webp)
Manual Operation
R&S
®
UPV
154
Getting Started 1146.2078.62 ─ 09
Varying a value
(Direct mode)
Highlight the numeric
entry field, switch to
Direct mode with a
rotary-knob click; posi-
tion the digit cursor with
the > or < cursor keys.
Vary the numeric value
using the rotary knob.
All changes are set
directly in the hardware.
Highlight the numeric
entry field, switch to
Direct mode with the
Enter key; position the
digit cursor with the > or
< cursor keys. Change
the numeric value with
the UP/DOWN cursor
keys.
All changes are set
directly in the hardware.
---
Changing units
Highlight the numeric
entry field, select the unit
using the appropriate
softkey.
The physical value is
converted to new
numeric value with the
newly selected unit.
Highlight the numeric
entry field, select the unit
using the F5 to F12
keys.
The physical value is
converted to the new
numeric value with the
newly selected unit.
Highlight the numeric
entry field, click the
appropriate softkey but-
ton to select the unit.
The physical value is
converted to the new
numeric value with the
newly selected unit.
4.7.10 Alphanumeric Entries – Text Entry Fields
When the focus is moved to a text entry field, the system enters Edit mode, which is
indicated by a green selection frame.
If the complete text (e.g. for graph labels) is to be newly entered, simply begin entering
characters using the keypad on the front panel; the old text is deleted automatically
when the first key is pressed. The keypad on the front panel of the R&S
UPV is auto-
matically switched to the mode for entering alphanumeric characters. Text is entered in
the same way as on cellphones: Repeatedly pressing a key calls up the characters
assigned to the corresponding key in sequence. A different key can be pressed imme-
diately to enter the next character. A brief pause must, however, be made when enter-
ing characters assigned to the same key.
The space character is assigned to the key, special characters are entered using
the decimal-point key and the key is used to toggle between upper and lower-case
characters.
The character to the left of the cursor can be deleted at any time during entry using the
UNDO key.
If an external computer keyboard is used, characters can be entered in the usual way.
If certain characters only are to be changed, position the cursor accordingly using the
cursor keys and enter the new characters (if the position of the cursor is changed
before the first character is entered, the old text will not be deleted). The default setting
is insert mode. It is only possible to change between insert and overwrite mode if an
external computer keyboard is used.
The text entry field is closed with:
●
ENTER – The newly entered text is adopted
Settings in the Panels