Manual Operation
R&S
®
UPV
178
Getting Started 1146.2078.62 ─ 09
Extreme values
If this checkbox is activated, a Min and Max characteristic is displayed that indicates
the lowest and highest measurement results of a measuring sequence.
Two additional gray lines which represent the measured extreme values (see the
example above) then appear in the graph.
The Min/Max values can thus also be recorded over a long period of time without the
measurement displays having to be monitored continuously.
Every restart of a continuous measurement with START resets the limit monitoring
again. Resetting the limit monitoring can also be done with the "Restart Min/Max, Lim
Violation" softkey.
Settings for the x-axis
The same rules that apply to the y-axis also apply to the settings of the x-axis.
Display of X and Y Values
The "Resolution" field is used to set how many digits are used when displaying values
on the x-axis and y-axis and at the cursor.
Values in linear units can be displayed with 3 to 7 digits; values in logarithmic units can
be displayed with a resolution of 0.1 dB to 0.00001 dB.
Loading and saving traces / scans
The current trace together with all scans can be saved in these parameter fields by
calling up the file directory using the ••• button; for details, see
Here, saved traces together with all of their scans can be loaded and displayed in the
current graph by calling up the file directory using the ••• button.
4.8.4.8
Evaluating Graphical Displays with Cursors and Markers
All graphical displays can be evaluated using horizontal and vertical cursors; the X and
Y-values shown in the display fields associated with the cursors are always current val-
ues.
Measurement Displays