![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652076.webp)
Startup
R&S
®
UPV
60
Getting Started 1146.2078.62 ─ 09
More information about the LXI standard is located on the LXI website under
or in the article about LXI in
"News from Rohde & Schwarz, 2006/II - 190".
2.10.3.4
LXI Browser Interface
The only information necessary for performing configuration via the LXI/Web interface
is the name of the instrument (which means its Windows name) in networks that oper-
ate with DHCP enabled, or its IP address in networks that operate with manual network
configuration. In rare cases where neither one of these names is known, it is also pos-
sible to derive the IP address from the MAC address, which is printed on the rear panel
of the instrument.
The instrument's LXI browser interface works correctly with all W3C compliant brows-
ers.
To start the instrument home page (welcome page), open a browser on the PC and
enter the instrument name or the IP address of R&S UPV66 in the address field, e.g.
http://rsUPV66100002 or http://10.113.10.203.
The instrument name for the R&S UPV66 is always RSUPV66vvv-xxxxxx, whereby vvv
represents the variant and xxxxxx the six-digit serial number of the instrument. If the
instrument does not have a variant number, the"vvv-" is omitted.
The instrument home page shows all important information in a compact form. The
MAC address and the (often dynamically assigned) IP address as well as the complete
resource string for the remote control via VISA are also located here.
The LAN indicator on the instrument will blink if Device Indicator is set to ACTIVE.
Clicking on "INACTIVE (press to toggle)" switches the status on and off. It can be used
Connect R&S UPV to a Network (LAN)