Manual Operation
R&S
®
UPV
127
Getting Started 1146.2078.62 ─ 09
2. In the second step, the measurements are set at the various analysis levels in the
"Analyzer Function" panel.
The measurements are set in the order of their importance:
● Measurements at the function level, e.g. distortion measurements (possibly
with Post FFT enabled)
● Settings at the monitor level, e.g. DC measurement
● Display of the peak value at the input monitor level
● Display of frequency, phase/group delay in the freq/phase level
In addition, the Waveform and, if necessary, Protocol Analysis functions can be
switched on and off in this panel.
Functional Division of the Audio Analyzer