![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652193.webp)
Manual Operation
R&S
®
UPV
177
Getting Started 1146.2078.62 ─ 09
Main gridlines which are labeled with the associated numeric values can be added with
different intervals.
Subgridlines are used for further subdivisions; these lines are not labeled.
Limits
A lower and/or upper limit can be defined for each measurement result.
If the limit is activated, each measured value is compared with the limit.
Limit curves appear as a red line on the graph.
Each measured value which violates a limit is highlighted by a red dot on the curve. In
addition, a red arrow pointing up/down in the bottom right-hand corner of the graph
provides a permanent indication of limit overranging/underranging.
Every restart of a continuous measurement with START resets the limit monitoring
again. Resetting the limit monitoring can also be done with the "Restart Min/Max, Lim
Violation" softkey.
1 = Limit overshooting (here also marked with circles)
2 = Limit line
3 = Max value trace
4 = Trace
5 = Min value trace
6 = Limit display
Measurement Displays