Startup
R&S
®
UPV
67
Getting Started 1146.2078.62 ─ 09
When saving as
default.rdp
file, the connection to R&S UPV is offered as
default at the start of the program. When saving under a different name, the setting
for the connection with R&S UPV is provided in the selection list which is called up
by clicking on the button in the "Computer:" entry line.
5. 5. The resolution for the display of the R&S UPV monitor is set to 800 x 600 on the
Display tab.
6. Establish the connection by clicking on the "Connect" button.
After the connection has been established, the audio analyzer screen appears on
the external computer. Operation is possible with the mouse and/or the keyboard.
Buttons on the front panel that do not have a direct correspondence to the key-
board can be replaced by shortcuts (see
chapter 4.3.4, "Operation Using an Exter-
If several R&S UPVs should be manually remote-controlled by one computer, a
separate Remote Desktop Control window must be opened for every R&S UPV.
This is possible by repeatedly starting the program on the external computer.
2.11 Firmware Update
The firmware of R&S UPV is supplied in a file with the name
Setup-xxxxRelease.exe
. The sequence of digits for
xxxx
consists of the main
version number followed by the subversion number, revision number and build num-
ber.
It is required to connect an external keyboard and a mouse.
Firmware Update