![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652120.webp)
Getting Started
R&S
®
UPV
104
Getting Started 1146.2078.62 ─ 09
b) If necessary, it is possible to toggle between AC and DC coupling using the two
radio buttons.
The fields for the measurement bandwidth are already preset with the appropri-
ate setting; no prefilter is required here.
In this example, the signal to be measured is supplied via the balanced input
sockets (Bal setting). The analyzer can also be connected to the generator
internally.
Floating input circuitry for the analyzer (see
on page 80) and the auto-range function are generally the correct set-
tings to be used.
The default settings in the following fields are also correct.
This completes the settings in the "Analyzer
Config" panel.
Introduction to Instrument Operation Using Examples