![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652106.webp)
Getting Started
R&S
®
UPV
90
Getting Started 1146.2078.62 ─ 09
Analyzer Function
●
Selection of measurement functions
●
Measurement speed and accuracy
●
Activation of filter and equalizer
●
Activation of Post FFT
●
Selection and settings for level monitor
●
Selection and settings for input monitor
●
Selection and settings for frequency, phase, group delay measurement
●
Selection and settings for waveform monitor
Filter
●
Definition of filter properties
Auxiliaries
●
Settings for integrated loudspeaker and connected headphones
●
Settings for R&S UPV U2 BNC audio monitoring outputs
●
Settings for auxiliary analog output
●
Settings for trigger input and trigger output
Switcher Panel
●
Operation of one or more R&S UPZ audio switchers
Protocol Generator
●
Settings for the R&S UPV K21 digital audio protocol
Panels which can be selected via the "DispConfig" menu bar button:
Function Config
Level Monitor
Config
Input Config
Freq Phase Config
These four panels contain settings for displaying measured values
●
in the numeric display fields
●
in the associated combo displays
●
and settings for limits, minimum values and maximum values
Sweep Graph Config
Impulse Response
FFT Graph Config
Waveform Config
PESQ/POLQA
Bar Graph Config
Up to four of each of these panels are available; they contain settings for dis-
playing measurement values in the graphical windows, e.g.
●
One or two-channel display
●
Units, scaling, grid lines, etc.
●
Evaluation of minimum and maximum values
●
Entry of limit curves
●
Settings for cursors and markers
The measurement results of the audio analyzer are shown in the following display win-
dows (for a detailed list of all panels with the most important setting parameters, see
Except for the Dig Analyzer Protocol window, the panels can be selected via the "Dis-
plays" button in the menu bar:
Brief Introduction to Operation