Getting Started
R&S
®
UPV
99
Getting Started 1146.2078.62 ─ 09
●
Waveform
●
PESQ/POLQA
●
Bar Graph
These windows can be set using the associated configuration panels.
All graphical displays can be evaluated using horizontal and vertical cursors; markers
are used to identify important measurement points. A broad range of softkey control
functions can be used to scale graphs, to display sections of graphs, and to perform
many other tasks.
3.4 Introduction to Instrument Operation Using Examples
3.4.1 Measuring the Frequency Response of an Amplifier, Equalizer, etc.
This example is based on the factory settings of the audio analyzer. It explains the
changes made in the individual panels to set up the measurement and describes how
to graphically display the measurement results. Finally, the example shows how to
save the defined measurement setup so that it can be used again for other applica-
tions.
1. Step: Loading the factory settings
The easiest way to load the factory settings of the instrument is to press the
PRESET key on the front of the R&S UPV.
Alternatively, the factory settings can be loaded by opening the menu bar with the
MENU key, highlighting the "File" button with the rotary knob and activating it with a
Introduction to Instrument Operation Using Examples