![background image](http://html.mh-extra.com/html/rands/upv/upv_getting-started_3262652233.webp)
Manual Operation
R&S
®
UPV
217
Getting Started 1146.2078.62 ─ 09
Auxiliaries
Audio monitoring function
●
Settings for integrated loudspeaker and connected headphones
●
Signal source and channels
●
Volume
●
ON/OFF and volume control also possible using keys in CONTROL panel
Auxiliary Analog Output
●
Function selection and settings
Trigger Input, Trigger Output
●
Function selection and settings
Switcher Panel
●
Function settings and operation of one or more connected Audio Switchers
R&S
UPZ.
Protocol Generator
●
Settings for the generator functions for generating the digital audio protocol
of the R&S
UPV-K21 option (digital audio protocol).
Panels which can be selected via the Disp Config menu bar button
Function Config
●
Settings for measured values of active measurement function in numeric dis-
play field
●
Settings for associated combo displays
●
Settings for limits, minimum values and maximum values
Level Monitor Config
●
Settings for numeric measured values of level monitor in numeric display
field
●
Settings for associated combo displays
●
Settings for limits, minimum values and maximum values
Input Config
●
Settings for measured values of input monitor in numeric display field
●
Settings for associated combo displays
●
Settings for limits, minimum values and maximum values
Freq Phase Config
●
Settings for measured values of frequency, phase and group delay measure-
ment in numeric display field
●
Settings for associated combo displays
●
Settings for limits, minimum values and maximum values
Sweep Graph 1 to 4
Config
●
Four of these panels are available so that up to 4
sweep graphical windows
can be displayed simultaneously
●
Setting of all details for one-channel or two-channel graphical display of
sweep functions, e.g. units, scaling, gridlines, etc.
●
Evaluation of minimum and maximum values
●
Entry of limit curves
●
Settings for cursors and markers
Impulse Response
●
Setting of all details for graphical display of impulse response, e.g. number of
curves, units, scaling, gridlines, etc.
●
Entry of limit curves
●
Settings for cursors and markers
FFT Graph 1 to 2 Con-
fig
●
Two of these panels are available so that up to 2
FFT graphical windows can
be displayed simultaneously
●
Setting of all details for one-channel or two-channel display of FFT graph,
e.g. units, scaling, gridlines, etc.
●
Evaluation of minimum and maximum values
●
Entry of limit curves
●
Settings for cursors and markers
Waveform Config
●
Setting of all details for graphical display of waveform analyzer, e.g. number
of curves, units, scaling, gridlines, etc.
●
Entry of limit curves
●
Settings for cursors and markers
Overview of Panels and Measurement Displays (Graphical Windows)