Spectrum Measurements
R&S
®
ESR
360
User Manual 1175.7068.02 ─ 12
6.2.6
Setting the Bandwidths and Sweep Time – BW Key
The BW key is used to set the resolution bandwidth, video bandwidth (VBW) and
sweep time (SWT). The values available for resolution bandwidth and video bandwidth
depend on the selected filter type. For details on channel filters see also
ter 6.2.6.4, "List of Available RRC and Channel Filters"
To open the bandwidth menu
●
Press the BW key.
The "Bandwidth" menu is displayed.
Menu and softkey description
●
Chapter 6.2.6.1, "Softkeys of the Bandwidth Menu"
Further information
●
Chapter 6.2.6.4, "List of Available RRC and Channel Filters"
●
Tasks
●
Chapter 6.2.6.2, "Specifying the Bandwidth"
●
Chapter 6.2.6.3, "Selecting the Appropriate Filter Type"
6.2.6.1
Softkeys of the Bandwidth Menu
The following table shows all softkeys available in the "Bandwidth" menu. It is possible
that your instrument configuration does not provide all softkeys. If a softkey is only
available with a special option, model or (measurement) mode, this information is pro-
vided in the corresponding softkey description.
For Spurious Emission Measurements, the settings are defined in the "Sweep List" dia-
log, see
Bandwidth settings are only available for RF measurements.
............................................................................................ 364
Configuration