Data Management and Documentation
R&S
®
ESR
551
User Manual 1175.7068.02 ─ 12
Adding and Removing Datasets
Before you can print a test report, you have to fill it with data.
Data in case of the test report comes in datasets. Each dataset contains the results of
one measurement.
The "New" button or softkey creates a new test report. The last measurement result is
added to the report. If you create a new report, the datasets of the previous report are
lost.
The "Append" button or softkey adds a dataset to the current report.
The "Remove" button removes the selected dataset.
The "Remove Selection" removes all currently selected datasets.
Note that a test report has to contain at least one dataset.
When you add a dataset ("New" or "Append"), the R&S
ESR opens a dialog box to
define the values of the header variables.
Enter descriptions of the variables as required.
For more information on changing the labels of the header see
Remote command:
New report:
Remove several datasets:
HCOPy:TREPort:TEST:REMove:SELected
Selecting Datasets for the Report
When you add a dataset to the report, it is automatically included in the test report. You
can exclude a dataset from the test report without removing the data itself in the "Add"
column of the "Test Report Content Selection" dialog box: if a dataset is not checked in
that column, the data is still available, but not part of the test report.
To make selecting datasets easier, the R&S
ESR provides the "Select All" (selects all
datasets), "Deselect All" (selects no dataset) and "Invert Selection" (selects all cur-
rently deselected datasets and vice versa) buttons.
Working with Test Reports
