Remote Control
R&S
®
ESR
747
User Manual 1175.7068.02 ─ 12
Example:
POW:ACH:MODE REL
Sets the adjacent channel measurement mode to relative.
Manual operation:
See
[SENSe:]POWer:HSPeed
<State>
This command switches on or off the high-speed channel/adjacent channel power
measurement. The measurement itself is performed in zero span on the center fre-
quencies of the individual channels. The command automatically switches to zero span
and back.
Depending on the selected mobile radio standard, weighting filters with characteristic
or very steep-sided channel filters are used for band limitation.
Parameters:
<State>
ON | OFF
*RST:
OFF
Example:
POW:HSP ON
Manual operation:
See
[SENSe:]POWer:NCORrection
<Mode>
This command turns noise cancellation on and off.
If noise cancellation is on, the R&S
ESR performs a reference measurement to deter-
mine its inherent noise and subtracts the result from the channel power measurement
result (first active trace only).
The inherent noise of the instrument depends on the selected center frequency, resolu-
tion bandwidth and level setting. Therefore, the correction function is disabled when-
ever one of these parameters is changed. A corresponding message is displayed on
the screen. Noise correction must be turned on again manually after the change.
Parameters:
<Mode>
ON
Performs noise correction.
OFF
Performs no noise correction.
AUTO
Performs noise correction.
After a parameter change, noise correction is restarted automati-
cally and a new correction measurement is performed.
*RST:
OFF
Example:
POW:NCOR ON
Manual operation:
See
Remote Commands in Spectrum Analyzer Mode
