Tooki-Maserati 1-16-2009
Rev 1.0 Mark Ryan
1 |
P a g e
100 NW 11
TH
Street, Boca Raton, FL 33432
Tel. 561-955-9770 Fax. 561-955-9760
Tooki-Maserati
Adds Bluetooth phone interface for 2004 to 2008 Maserati Quattroporte vehicles.
What’s in the box
Package Contents
1. Interface
module
2. Interface
harness
3. Microphone.
Radio Removal and Installation
Radio Dash Images
1. Remove cup holder insert and remove (1) Phillip screw.
Pull up the shifter trim panel and unplug connectors to
lights under trim panel.
2. Using a plastic trim tool remove the AC vent and clock trim
panel above radio and unplug the clock.
3. Remove (4) Phillip screws from around radio and climate
control panel. Two above and two below the panel.
4. Pull out the radio climate control panel to gain access to
back of radio.
5. Connect the interface harness (white/red wire) to the
(brown/black wire) on the radio main harness. (Radio mute
wire).
6. Connect the interface harness (red wire) to +12volt
constant power.
7. Connect the interface harness (black wire) to ground.
8. Connect the 12 Pin connector to the corresponding connect
port on the radio.
9. Connect the 8 Pin Molex connector to the interface module.
10. Place the interface module in the dash behind the radio.
11. Install the microphone towards the center of the vehicle
headliner and in front and drivers side of the rearview
mirror. Run the wire down to the interface box and plug into
the microphone port.
12. Reassemble dash in reverse order.
