RADWAG UYA 4Y, User Manual

Page: 111 / 196

- 111 -
- Characteristics of sample’s negative errors 2T1
- Net mass of a controlled packaging
- Tare of a packaging
- Control status of a packaging
Load empty - Command for process in progress with specified number of all
packagings to be weighed
-
Work pane in a form of graph.
Graph applies to control of mass, while estimating average tare
value preview of packaging mass distribution is not possible.
- Information on control
- Abortion of a control process
Caution
If a product is to be controlled by “Non-destructive average tare” mode, then accordingly to regulation standard
deviation “S” for its packaging mass, based on at least 10 measurements, cannot be greater than 0.25 of
maximum permissible negative error T, for nominal packaging mass.
After the last packaging mass measurement has been performed, following message is displayed:
•
Press button to proceed to control without saving the newly estimated average
packaging mass to product data.
•
Press button to proceed to control with saving the newly estimated average packaging
mass to product data.
Measurements results are analysed continuously during control and displayed in respective fields: