RADWAG UYA 4Y, User Manual, Page: 107 / 196

- 107 -
28.4. EDITING PRODUCT FOR CONTROL
In order to edit a product go to „ / Database” submenu.
CAUTION!
For cooperation with < E2R System> software database editing is blocked on a balance. Products editing
and export is carried out by means of the software.
Procedure:
1. Enter „ / Database” submenu.
2. Enter < Products> database, select a particular record.
List of data defined for control:
Pictogram Data Overview
Name Product name
Code Product code
EAN code Product EAN code
Mass Product nominal mass
Tare
Tare value of a product (pre-set automatically
while selecting a product out of the database)
PGC mode
Control type: Non-destructive average tare, Non-
destructive empty – full, Destructive full – empty,
Destructive empty – full
Batch
Series of measurements for control: Non-
destructive empty – full, Destructive full – empty,
Destructive empty – full
Unit Unit of a product: [g] or [ml]
Batch quantity Declaration of number of items of controlled batch
Time interval for
avarage tare
determination
Time interval given in [h] determining how often
average tare must be estimated for a given
product
Quantity of
packages
Declaration of number of packages that are to be
subjected to process of average tare
determination (for Non-destructive average tare
type of control)
Internal control
Submenu for defying criteria for internal control
(see the next chart)
Density
Product density (value range 0,1g/cm
3
- 5g/cm
3
)
Apart from the above listed options there are other ones which may be used for different working
modes (e.g. CHECKWEIGHING, THRESHOLDS, etc.)
List of data for internal criteria:
Internal control Internal control criteria on <YES> / off <NO>
Samples quantity Sample quantity for a product