RADWAG UYA 4Y, User Manual

Page: 101 / 196

- 101 -
Quantity of disqualifying
samples [Qn + T1]
Max permissible quantity of T1 high limit errors with
nominal weight as point of reference
Quantity of disqualifying
samples [Qn + T2]
Max permissible quantity of T2 high limit errors with
nominal weight as point of reference
Quantity of disqualifying
samples [Qn + T3]
Max permissible quantity of T3 high limit errors with
nominal weight as point of reference
Quantity of disqualifying
samples [Qn + T4]
Max permissible quantity of T4 high limit errors with
nominal weight as point of reference
CAUTION!
For information on how to edit product records read section 30.2 of this user manual.
4. Return to < SQC> mode home screen, press < > button (control start) located in the
bottom bar.
5. <Batch Number> window with an on-screen keyboard opens (only if <Request batch number>
parameter is set to <YES> parameter).
6. Enter the number of controlled product batch, press < > button for confirmation.
CAUTION!
You can abort the control process at any time, to do it press < > button (control stop) located in the bottom
bar.
In the course of control other soft keys and function keys, the and keys are locked.
26.2. SUPPLEMENTARY SETTINGS FOR SQC MODE
The supplementary settings enable adjusting the working mode to your needs and requirements.
SQC functions:
Request batch number: use this function to force the user to enter batch number of a product prior
each control procedure start.
Procedure:
1. Select <Request batch number> parameter, window with NO/YES values is displayed.
2. Select NO value to disable the function, select YES value to enable the function. The
previous screen is displayed automatically.
Batch number: use this function to enter identification number for controlled products batch.
Procedure:
1. Select < Batch number> parameter, Batch Number window with an alphanumeric
keyboard is displayed.
2. Enter the required batch number and press < > button for confirmation.
For information on remaining functions read section 15.7. of this user manual “Additional Parameters
for a Weighing Process”.
26.3. CONTROL OPERATION
Procedure: