RADWAG UYA 4Y, User Manual, Page: 149 / 196

- 149 -
1. Open < Barcode scanner> submenu.
2. Press < Test> parameter; <Test> window opens with ASCII and HEX fields in it.
3. Scanned barcode is entered into ASCII or HEX field; result of test is displayed in the bottom
part of the window.
When:
•
<Prefix> and <Suffix> are identical for both – balance settings and scanned barcode – the
test is <Positive>.
•
<Prefix> and <Suffix> differ for both – balance settings and scanned barcode – the test is
<Negative> .
32.4. TRANSPONDER CARD SCANNER
You can log in to the balance by means of:
•
Inserting user’s password using on-screen keyboard,
•
Transponder card scanner, by approximating a registered card to the scanner.
Caution:
For correct balance’s cooperation with a transponder card scanner set appropriate baud rate value in submenu
< Communication> (default 9600b/s).
Transponder card scanner port
The balance enables communicating with a transponder card scanner using the following ports:
•
RS 232 (COM1),
•
RS 232 (COM2).
In order to log in an operator using a transponder card scanner, first assign a number of an already
registered card to a selected user in the database of operators.
Procedure:
1. Connect a transponder card scanner to a balance’s port (RS 232 COM1 or RS 232 COM2),
select communication port in balance settings for the transponder card scanner.
2. In < Communication> submenu set baud rate for compatible with the one of the
transponder card scanner (default 9600b/s).
3. Enter operators database, go to < Card no.> parameter and edit desired operator’s
record.
4. On entering editing mode in < Card no.> parameter, an editing window <Card no.> is
opened with an on-screen keyboard.
5. Approximate the card to the transponder card scanner. The balance automatically displays
number of detected card in the <Card no.> field.
6. Accept recognized number by pressing key and return to the weighing.
32.5. ADDITIONAL DISPLAY
The balance enables communicating with an additional display using the following ports:
•
RS 232 (COM1),
•
RS 232 (COM2),
•
TCP.
Type of data displayed on an additional display is declared in variable
<Project>.
Procedure – designing a variable:
1. Enter < Peripheral devices> parameters of parameters.