RADWAG UYA 4Y, User Manual

Page: 173 / 196

- 173 -
2 – fast+reliable
3 – reliable
CAUTION!
The numbering is assigned to a particular value release option and it is identical for all balance types.
The command changes settings for a current working mode if, for a particular balance type, value
release settings are assigned to the working mode
An example:
Command: ARS_2 CR LF
– set value release parameter to fast+reliable
option
Response: ARS_OK CR LF – fast+reliable option set
Set last digit
Format: LDS_n CR LF
Response options:
LDS_OK CR LF
– command carried out
LDS_E CR LF
– error in-course of command execution, no parameter or
incorrect format
LDS_I CR LF – command understood but not accessible at this moment
n – parameter, decimal value determining last digit settings
n →
1 – always
2 – never
3 – when stable
CAUTION!
The numbering is assigned to a particular last digit option and it is identical for all balance types.
The command changes settings for a current working mode if, for a particular balance type, last digit
settings are assigned to the working mode.
An example:
Command: LDS_1 CR LF – set last digit option to value ‘always’
Response: LDS_OK CR LF – ‘always’ value set
Give accessible units
Command overview: Command returns units available for a particular device and for a current
working mode.
Format: UI CR LF
Response options:
UI_”x
1
,x
2
, … x
n
”_OK CR LF – command carried out, returns accessible units
UI_I CR LF
– command understood but not accessible at this
moment
x – unit symbols, separated by means of comas
x
→ g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht, tola, u1, u2
An example:
Command: UI CR LF – return available units
Response: UI_”g, mg, ct”_OK CR LF – response: available units
Set current unit
Command overview: Command sets current unit for a particular device.
Format:
US_x CR LF
Response options:
US_ x_OK <CR><LF
– command carried out, response: current unit
US_E CR LF
–error in-course of command execution, no parameter or
incorrect format
US_I CR LF – command understood but not accessible at this moment
x – parameter, units symbols: g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht, tola,
msg, u1, u2, next
CAUTION! if x=next, the command swaps to another avaialable unit on the list (it simulates „ ”
button pressing).
An example:
Command: US_mg CR LF – set „mg” unit
Response: US_mg_OK CR LF – „mg” set as a current unit