RADWAG UYA 4Y, User Manual

Page: 170 / 196

- 170 -
parameter given in [ms]. Recommended range <50 - 5000>. If value
greater than the permissible high limit is given, than BEEP sound is
operated for the maximum permissible amount of time.
An example:
Command: BP_350 CR LF – activate BEEP for 350 ms
Response: BP_OK CR LF – BEEP activated
CAUTION!
BEEP sound activated via BP command is inhibited if in-course of its activation the sound is activated by
means of other device: keypad, touch panel, proximity sensors.
Give available working modes
Command overview: Command returns accessible working modes.
Format:
OMI CR LF
Response options:
OMI CR LF
n_”Nazwa modu” CR LF :
n_”Nazwa modu” CR LF
OK CR LF
– command carried out, response: accessible working
modes
OMI_I CR LF – command understood but not accessible at this moment
Mode name – parameter, working mode name, inserted in between inverted comas. The name
takes form given on a particular balance display, it is provided in a currently selected language.
n – parameter, decimal value determining working mode number.
n →
1 – Weighing
2 – Parts Counting
3 – Deviations
4 – Dosing
5 – Formulations
6 – Animal Weighing
8 – Solids Density
9 – Liquids Density
10 – Peak Hold
11 – Totalizing
12 – Checkweighing
13 – Statistics
CAUTION! Working modes numbering is identical for each kind of balance. The numbers are assigned
to working modes names. Some balances give only the number as a response.
An example
1:
Command: OMI CR LF – return accessible working modes
Response: OMI CR LF
2_” Parts counting” CR LF
4_” Dosing” CR LF
12_”Checkweighing” CR LF
– accessible working modes are given in
return:
mode name
OK CR LF – command carried out
An example 2:
Command: OMI CR LF – return accessible working modes
Response: OMI CR LF
2 CR LF
4 CR LF
12 CR LF
– accessible working modes are given in return:
mode number
OK CR LF – command carried out
Set working mode
Command overview: Command sets particular working mode.
Format:
OMS_n CR LF
Response options:
OMS_OK CR LF
– command carried out
OMS_E CR LF
– error in-course of command execution, no parameter or incorrect
format
OMS_I CR LF – command understood but not accessible at this moment