RADWAG UYA 4Y, User Manual

Page: 129 / 196

- 129 -
X - control type which takes the following values:
U – control regulated by the act,
Z – control completed by a user,
W - control regulated by an internal criteria.
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end,
T – control with determining the average tare value.
You can preview data on each process of average tare determination.
Procedure:
1. Enter submenu < Databases> in accordance with section 30 of this user manual.
2. Enter < Average tares> database and select a desired record.
List of parameters defined for a control:
1. Product [name of a product which packaging is checked for
average tare determining process]
2. Status [status (result) of a process]
3. Date [date of carried out process]
4. Tare [determined value of packaging tare]
5. S [average standard deviation]
6. 0.25 T1 [the value of a criterion for process result]
7. Measurements quantity [number of completed measurements of tare value]
8. User [name of a user carrying out the process]
9. Method [control method (internal criteria, regulated by the
act)]
30.10. PIPETTES
Pipettes database contains records that can be modified.
Procedure:
1. Enter submenu < Databases>, and press < Pipettes> field.
2. Press < Add > soft key to add a new pipette.
3. If a pipette already exists in the database, press field with its name to enter its specification
which can be modified.
List of data defined for pipettes:
1. Name
2. Code
3. Model
4. Tip
5. Type of volume
6. Nominal volume
7. Minimal volume
8. Number of channels
9. Type
10. Tested volumes