RADWAG UYA 4Y, User Manual

Page: 45 / 196

- 45 -
3. Level the balance, to do it turn the feet in a way indicated by blinking pictograms on the display
< > – the level point moves towards the center of the level circle.
4. As the level point is in the center point, its colour changes from red to green – which is a
confirmation for correct level status.
CAUTION!
The balance is equipped with Automatic Level Control mechanism. For detailed information go to section 34.8
of this user manual.
15.4. BALANCE ZEROING
Zeroing is a function allowing to zero mass indication. In order to zero mass indication, press
button. Mass indication of zero value is displayed together with precise zero and stability
markers.
Zeroing process is an equivalent for determining new zero point, recognized by the balance as
precise zero. Zeroing is possible only for stable status of display indication.
CAUTION!
Zeroing the display indication is possible only within ±2% range of instrument’s maximum capacity. If the
zeroed value is above ±2% of the maximumcapacity, then the software indicates a respective error message,
Err2.
15.5. BALANCE TARING
Taring is a function allowing to determine net weight of a measured object. In order to determine net
weight of the object, place object’s container (packaging) on the weighing pan, and on stabilization of
measurement result press key. The display indicates mass equal zero and symbols: Net and
. On taking off the weighed load and its packaging from the weighing pan, the display indicates
sum of total tared mass with minus sign.
The software enables assigning tare value to a database-stored product. Using this option, the
software automatically uploads data on tare value for a particular product upon its selection from the
database.
CAUTION!
Taring negative values is impossible. On taring negative values the balance responds with an Err3 message. In
such case, zero balance indication and repeat taring procedure.
Manual tare determination
Procedure :
1. While in optional mode press quick access key.
2. An on-screen numeric keyboard is displayed.
3. Enter tare value and press key.