RADWAG UYA 4Y, User Manual

Page: 100 / 196

- 100 -
2. Set < SQC> mode parameters, for detailed information read section 26.2.
3. Select a product that is to be controlled (press < > button located in the bottom bar or on
the overlay), mind to select a product with correctly entered control data.
List of data to be entered prior control start:
Mass Nominal mass of a product
Tare Packaging mass in the adjustment unit
SQC
Batch quantity
Declaring quantity of controlled batch
Error value [T4-]
Max permissible negative T4 error value with
nominal weight value as point of reference
Error value [T3-]
Max permissible negative T3 error value with
nominal weight value as point of reference
Error value [T2-]
Max permissible negative T2 error value with
nominal weight value as point of reference
Error value [T1-]
Max permissible negative T1 error value with
nominal weight value as point of reference
Error value [T1+]
Max permissible positive T1 error value with nominal
weight value as point of reference
Error value [T2+]
Max permissible positive T2 error value with nominal
weight value as point of reference
Error value [T3+]
Max permissible positive T3 error value with nominal
weight value as point of reference
Error value [T4+]
Max permissible positive T4 error value with nominal
weight value as point of reference
Quantity of disqualifying
samples [Qn – T4]
Max permissible quantity of T4 low limit errors with
nominal weight as point of reference
Quantity of disqualifying
samples [Qn – T3]
Max permissible quantity of T3 low limit errors with
nominal weight as point of reference
Quantity of disqualifying
samples [Qn – T2]
Max permissible quantity of T2 low limit errors with
nominal weight as point of reference
Quantity of disqualifying
samples [Qn – T1]
Max permissible quantity of T1 low limit errors with
nominal weight as point of reference