RADWAG UYA 4Y, User Manual

Page: 14 / 196

- 14 -
2. TRANSPORT AND STORAGE
2.1. DELIVERY CHECKLIST
Upon delivery it is necessary to check the package and the device, make sure that your package
bears no signs of damage. If it does contact the manufacturer’s representative.
2.2. PACKAGE
Keep all package elements should your balance be transported in the future. Remember that only
original packaging can be used for shipping purposes. Prior packing uncouple any cables, remove
any separable components (weighing pan, shields, inserts). Pack the device components into an
original packaging. The original packaging protects the equipment against potential damage during
transportation.
3. UNPACKING AND INSTALLATION
3.1. PLACE OF USE AND ASSEMBLING
•
The balance has to be stored and used in locations free of vibrations and shakes, free of air
movement and dust.
•
Ambient air temperature cannot exceed the range of: +10 °C ÷ +40 °C.
•
Ambient relative humidity cannot exceed 80%.
•
During balance operation, ambient temperature in the weighing room cannot change rapidly.
•
The balance has to be located on a stable wall console desk or a stable working table which is
not affected by vibrations and distant from heat sources.
•
Take special precaution when weighing magnetic objects, as part of the balance is a strong
magnet. Should such loads be weighed, use under-pan weighing option, which removes the
weighed load from area influenced by the balance’s magnet. The hook for under-pan weighing
is installed in balance’s base.
3.2. UNPACKING
Cut the adhesive tape. Take the device out of the packaging. Open the accessory box, take the
device components out of it.
3.3. STANDARD DELIVERY COMPONENTS LIST
•
Balance
•
Bottom insert ( XA)
•
Centring ring ( XA)
•
Bottom ring (UYA, MYA)
•
Lid for weighing pan (UYA, MYA)
•
Weighing pan
•
Anti-draft chamber
•
Bottom ring
•
Power supplier
•
User Manual – CD version