When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-125
Did not send project.
The project data does not exist on the
GP unit. (The unit is showing the
default Initial Start Mode screen, etc.)
Or the data is damaged.
First, transfer the project.
)
GP-Pro EX Refer-
ence Manual
“33.1 Settings
Menu” (page 33-
2)
Failed to save CF card data.
Either the CF-card is not correctly
inserted, or it is write-protected.
Make sure the CF-card can be used
(you may not be able to access CF-
cards not made by Pro-face).
—
The project does not match
the defined display unit.
The transfer source project and the
project inside the main unit are differ-
ent and therefore could not be com-
pared. Only the same project can be
compared.
)
GP-Pro EX Refer-
ence Manual
“33.4 Comparing
Project Changes
Prior to Transfer”
(page 33-25)
Format error.
The initialization of the main unit
device failed.
Transfer again in a location where
there is not a lot of noise occurring.
—
Unable to locate defined dis-
play unit.
The designated communication device
does not exist or cannot be used.
Confirm the PC’s LAN settings and
check if the USB driver is installed.
Transfer failed.
An error occurred during communication.
Confirm that there is not a lot of noise
occurring. (Do not use a USB exten-
sion cable, etc.)
Write error occurred on the
display unit.
The data write to the main unit failed
due to a flash malfunction.
If there is no improvement even after a
forced transfer, please contact your
local GP distributor.
)
GP-Pro EX Refer-
ence Manual
“33.10.1 [Trans-
fer Settings] Set-
tings Guide”
(page 33-59)
Model does not support CF
cards or card is missing.
Confirm whether the CF-card is cor-
rectly inserted. (You may not be able to
access CF-cards not made by Pro-
face.)
—
The defined file name already
exists. Use another name.
There is a directory with the same
name as the file you are trying to copy.
Delete the content of the CF-card and
retransmit the file. If an error occurs
while you are transmitting the project,
force the transfer.
)
GP-Pro EX Refer-
ence Manual
“33.5 Transfer-
ring Data Only to
a CF Card” (page
33-28)
Failed to write to the CF-card.
The CF-card may not be correctly
inserted, or it may be write-protected.
Make sure that the files in the CF-card
are not write-protected.
—
Continued
Error Message
Cause and Solution
Reference
