When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-122
Errors displayed during simulation
Error Message
Cause and Solution
Reference
Please stop and exit the simu-
lation to continue.
The user tried to close the Editor dur-
ing simulation. Before closing the Edi-
tor, complete simulation.
)
GP-Pro EX Refer-
ence Manual
“32.2.2 Proce-
dure” (page 32-4)
Cannot change language dur-
ing simulation.
The user tried to change the operating
language in the Editor [Option Set-
tings] when simulation was in
progress. Before changing the operat-
ing language, complete simulation.
)
GP-Pro EX Refer-
ence Manual
“5.14.7 [Prefer-
ences] Settings
Guide” (page 5-
147)
The simulation could not be
started.
Simulation does not start due to some
problem.
The file may have been broken. Rein-
stall GP-Pro EX.
)
GP-Pro EX Refer-
ence Manual
“3.2.1 Required
for GP-Pro EX
Operating envi-
ronment” (page 3-
4)
Failed to start Simulation due
to project error. Run Error
Check to find problems.
The simulation did not start due to a
problem with communication with a
connected device. Run the simulation
after an error in the project file is cor-
rected.
—
