When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-127
When the CF memory loader is used
Unable to transfer. Target
types are different.
The type of Fonts which is registered
did not match.Download a correct
runtime system or protocol by using
USB or LAN.
—
Unable to transfer by modem.
Projects or editor versions are
different.
The type or the edit version of the
project did not match.Download a cor-
rect runtime system or protocol by
using USB or LAN.
—
Error Message
Cause and Solution
Reference
Files required to create boot
data are missing.
The system file for the memory loader
is not installed. Install the file again.
)
GP-Pro EX Refer-
ence Manual
“33.7.2 Transfer
Process u Create
a startup CF
Card/USB” (page
33-43)
Failed to create the backup
file.
The probable causes are that the free
space in the CF card is insufficient, the
file cannot be accessed, or the project
file is corrupt. Check the destination
again.
—
This model is not supported.
The selected project is for a model
which does not support the memory
loader tool. Check the model of the
project file.
)
GP-Pro EX Refer-
ence Manual “1.3
List of Supported
Functions by
Device” (page 1-
5)
Failed to read the backup file.
The probable causes are that the
backup file is corrupt, or the file
requires certain access rights. Check
the access rights for the backup file.
)
GP-Pro EX Refer-
ence Manual
“33.6.3 Remove/
Change Transfer
Password” (page
33-34)
Failed to reserve memory.
The PC memory may be insufficient.
Close the other applications that are
running.
—
Invalid backup file.
The selected file is not a backup file.
Select a valid file.
—
The system cannot find the
path specified.
The specified pathname does not exist
or is invalid.
Specify an existing, valid pathname.
—
Error Message
Cause and Solution
Reference