When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-161
Errors displayed with the LT-3000 series
Error Message
Cause and Solution
Reference
ID on I/O board does not
match.
The I/O board cannot be normally rec-
ognized. The I/O board may have a
fault.
Turn ON the power switch again, and
execute forced-transfer of the project
file.
If this same error persists, the I/O
board may have a fault. Please contact
your local distributor.
)
“2.12.3 Forcing
the transfer of
project files”
(page 2-72)
Failed to transfer firmware to
I/O board. Use forced transfer
method.
The I/O board firmware file is dam-
aged. The I/O board firmware cannot
be normally transferred to the I/O
board flash memory.
Execute forced-transfer of a project
file. If this same error persists, the I/O
board may have a fault. Please contact
your local distributor.
