When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-93
Errors displayed during screen creation
Project Converter
Startup
New Project File
Project Properties
Screen Management
Error Message
Cause and Solution
Reference
As a result of conversion,
more than 30000 characters
exist. Please divide the script
into user functions or delete
unnecessary comments.
A single script contains too many char-
acters. After dividing the script into
functions or deleting comments, retry
the conversion.
—
Error Message
Cause and Solution
Reference
Cannot open two or more dif-
ferent versions of an Editor at
the same time.
Open the same version of an Editor as
the running Editor.
—
No more Editors can be
opened.
Up to two Editors can be opened at the
same time.
Error Message
Cause and Solution
Reference
Failed to open file. The file
you are trying to open is not a
project file for this application.
Confirm that the file extension is
(
∗
.prx) and open the file.
—
Failed to open the project file
because of a file read error.
Couldn’t read because the target file is
damaged or it has a different format.
Check the read-from file extension and
read it again.
Failed to startup GP-PRO/
PB3. If the application has
already been installed, spec-
ify a file and run it.
Verify whether or not GP-Pro/PB III is
installed.
To install GP-Pro/PB III, you will need
a separate CD.
Error Message
Cause and Solution
Reference
Failed to create a folder.
Check the CF-card Output Folder and
the specified drive and folder.
)
GP-Pro EX Refer-
ence Manual “5.7.2
Setup Procedure n
Setting the Desti-
nation folder” (page
5-43)
Error Message
Cause and Solution
Reference
Unable to read project. Select
project again.
Confirm that the link to the file storage
location is established and read the file
again.
)
GP-Pro EX Refer-
ence Manual “5.8
Copying a Screen
from Another
Project” (page 5-
45)
Unable to copy current
project. Select another
project.
To specify the current project file, fin-
ish the editing and then specify the file.
