When an error message is displayed (Error code list)
Maintenance/Troubleshooting
1-126
When data is transferred with modem
File required for transferring
not found.
A file needed for transfer is damaged
or does not exist on the hard drive.
Reinstall the transfer tool.
)
GP-Pro EX Refer-
ence Manual
“33.10.5 Install-
ing the Transfer
Tool” (page 33-
68)
Timeout error.
Confirm that there is not a lot of noise
occurring. (Do not use a USB exten-
sion cable, etc.)
—
Exception error.
A module needed for transferring may
not be correctly installed.
Reinstall the transfer tool.
)
GP-Pro EX Refer-
ence Manual
“33.10.5 Install-
ing the Transfer
Tool” (page 33-
68)
Failed to send the project. Its
size exceeds the maximum
capacity.
The data size of the project file you are
trying to transfer exceeds the GP’s
screen capacity.
Decrease the data size by deleting
unnecessary screen data, etc.
)
GP-Pro EX Refer-
ence Manual “5.7
Viewing Project
Information”
(page 5-41)
Unable to transfer. Target
types are different.
The project file is not compatible with
the model to which it is transferred.
Change the type of the project file to a
file compatible with the target model,
and retry the transfer.
)
GP-Pro EX Refer-
ence Manual
“5.14.6 [System
Settings] Setting
Guide n [Dis-
play]” (page 5-
111)
Display unit does not support
WinGP. Application will end.
If WinGP is started under an incompat-
ible installation environment, this
popup message appears. Install WinGP
onto a compatible model.
)
GP-Pro EX Refer-
ence Manual
“37.2.1 Support-
ing Models” (page
37-6)
Error Message
Cause and Solution
Reference
Unable to transfer by modem.
I/O drivers are different.
Transfer by modem failed because the
type or version of the I/O driver did not
match.Download a correct I/O driver
by using USB or LAN.Download a
correct runtime system or protocol by
using USB or LAN.
—
Unable to transfer by modem.
Run time systems are differ-
ent.
Transfer by modem failed because the
version of the run time system or pro-
tocol did not match, or because the
protocol type is different.
—
Continued
Error Message
Cause and Solution
Reference